1.TROUBLESHOOTING FOR THE HARDWARE
Lower the guide while holding the knob.
3
Do not touch the stapling area (A in the figure).
The actual needle point could cause you personal injury.
Remove all jammed staples with something sharp.
4
Holding the knob, raise the guide, and return it to its
5
original position.
6
Fit the staple cartridge into the stapler.
Insert the staple cartridge until you hear a click sound (the
staple cartridge is latched). Then lower the lever slightly.
Close the front cover of the finisher.
7
1 TROUBLESHOOTING FOR THE HARDWARE
2
Clearing a Staple Jam
1
37