Error Codes On Transmission And Reception - Toshiba E-Studio 557 Manual

7.CHECKING THE EQUIPMENT STATUS WITH TopAccess
Error
Code
No Printer Kit/Printer Kit expired
4241
No Scanner Kit/Scanner Kit
expired
4242
No authority to execute a job
4311
Not authorized to store a file
4312
Not authorized to store in e-Filing
4313
Not authorized to send a Fax/iFax The user has not been authorized to perform this
4314
Not authorized to perform printing
4321
in the specified setting
Image data generation failure
4411
Double-sign encoding error
4412
Font download failure
4611
Font download failure
4612
Font download failure
4613
4621 Downloaded font deletion failure
 Error codes on transmission and reception
Error
Code
0012 Original misfeed
0013 Door open
0020 Power interruption
Interruption by paper misfeeds
0030
during direct transmission
Polling Error
0033
Memory full
0042
0050 Line busy
0051 Fax line cable disconnected
Problem Description
Problem Description
7 CHECKING THE EQUIPMENT STATUS WITH TopAccess
Corrective Action
Install the Printer Kit or Printer/Scanner Kit correctly before
printing.
Please register if the trial period of the Printer Kit or
Printer/Scanner Kit has expired.
Although the Printer Kit is installed, the Scanner Kit is not
installed; therefore, the Internet Fax function and Save as
file function using the N/W-Fax driver are not available.
Install the Scanner Kit correctly and try again.
Please register if the trial period of the Scanner Kit has
expired.
The user has not been authorized to perform this
operation. Ask your administrator.
The user has not been authorized to perform this
operation. Ask your administrator.
The user has not been authorized to perform this
operation. Ask your administrator.
operation. Ask your administrator.
The user has not been authorized to perform this
operation. Ask your administrator.
Check if the file to be printed is broken. Perform printing
again or use another printer driver.
A double-sign encoding error occurred because the PDF
file is encrypted in unsupported script. Printing the file in
this function is impossible.
Since the available number of fonts is exceeded, the font
cannot be registered. Delete at least one font.
Since there is no space in HDD, the font cannot be
registered. Delete at least one font.
Since an error has occurred, the font cannot be registered.
Perform downloading again or regenerate the font data
first.
Check if the font to be deleted is registered.
Corrective Action
Remove the misfed original.
Firmly close the open door.
Check the power interruption report.
Remove the misfed paper and reattempt the transmission.
Check polling options setup (Security Code, etc.), and
check whether the polling document exists.
Make sure that there is sufficient memory before making
the call again.
Reattempt the communications.
Check if the fax line cable is connected. To clear the
message, press the [FUNCTION CLEAR] button twice.
Error Codes 95