Datascope Mode - Toshiba TRST-A10 SERIES Maintenance Manual

4. DIP SWITCH FUNCTION
4.2

DATASCOPE MODE

Datascope Mode allows the user to test the printer's communications. When in Datascope Mode
the printer receives all communications, but instead of executing the commands it prints them
out on receipt paper as hexadecimal numbers in the order received. For example, the ASCII
character "A" is printed as the hexadecimal number 41 an so on.
To run the Datascope Mode:
After you have enabled the Datascope Mode through the Configuration Menu, exit the
1.
Configuration Menu.
Run a transaction from the host computer.
2.
All commands and data sent from the host computer will be printed as hexadecimal numbers as
shown in the illustration.
30 31 32 33 34 35 36 37 38 39 40 41 :
41 42 43 44 45 46 47 48 49 50 51 52 :
To exit the Datascope Mode:
1. Enter the Configuration Menu again
2. Disable the Datascope Mode
3. Exit the Configuration Menu
The printer is in Normal Mode and can communicate with the host computer.
0 1 2 3 4 5 6 7 8 9 @ A
A B C D E F G H I J K L
4-2
EO18-13005
4.2 DATASCOPE MODE