Reboot - Buffalo BSL-PS-G2108M User Manual

Chapter 2 Configuration
Parameter
Save to
Restore from
• When saving to a USB device, the extension is automatically set to "cfg".
• Do not turn off the device while saving or restoring.
• Once the file is restored, "The product will reboot" is displayed. Click Reboot to reboot. The
configuration will be applied after rebooting.
• Do not restore settings using a manually edited settings file. The switch may become inaccessible
if the settings file is broken.
• When restoring the settings file from a USB device, place the settings file in the root directory of
the USB device. Files in directories are not recognized.

Reboot

This is used to reboot the switch.
---> Management > Reboot
Parameter
Reboot
Meaning
PC: Click Save to save the settings.
USB Device: Specify the name of a file saved on the USB device as
the File Name.
Up to 31 characters including only alphanumeric
characters, "-" (hyphens) and "_" (underscores).
PC: Click Browse... for the File Name and specify the config
file, then click Restore to restore the configuration.
USB Device: A list of config. files on the USB device will be
displayed in File Name (USB Device). Select the file to
restore and click Restore to restore it.
Meaning
Click Reboot to reboot the switch.
- 48 -