Back Up And Restore Settings; Reboot - Buffalo BS-GS20 Series User Manual

Chapter 2 Settings
Notes:
• Switching to the lower version image (older version firmware) may delete some settings.
• If switching the firmware to version 1.0.3.32 or earlier, the Settings username and password may be changed
unintentionally. For more detailed information, refer to the "Restrictions" section in appendix A.

Back Up and Restore Settings

Save or restore the switch's settings.
Back Up Settings
Restore Settings

Reboot

Reboot the switch.
Reboot
Click [Save] to save current settings to a file.
Click [Browse] to select a settings file and click [Restore] to start restoring.
Notes:
• To finish restoring, reboot the switch.
• If restoring the switch's Settings from a Settings file while the switch is running
firmware version 1.0.3.32 or earlier, the Settings username and password
may be changed unintentionally. For more detailed information, refer to the
"Restrictions" section in appendix A.
Click [Reboot] to reboot the switch.
73