Buffalo BSL-PS-G2108M User Manual page 62

Appendix
Feature Parameter
QoS Status QoS Settings
Priority
QoS Mapping Port Priority
CoS Mapping
RADIUS Auth. Server
Reset Timer
Advanced
Port Authentication
Authentication
EAP Extensions
Password Password Authentication
Authentication
Port Trunking Port Trunking
Traffic Storm Broadcast
Control
Multicast
DLF
Mirroring Mirror 1
Mirror 2
BPDU BPDU Forwarding
Forwarding
Loop Prevention Loop Prevention
Syslog Settings Syslog Server
Type
Restore from Boot Mode
USB
Auto-save
I'm here! Duration of Beep
Default Setting
QoS: Off
Queue: Strict
None
Low
Low
Enabled
Auth. Server IP:
Auth. Server Port: 1812
Shared Secret:
3600 seconds
Termination-Action: Disabled
Disabled
Disabled
Enabled
Server Port: 8080
Disabled
Unlimited
Unlimited
Unlimited
Disabled
Disabled
Disabled
Enabled
IP Address:
Attach Header: MAC Address
Configuration:
Authentication: Notice + Detail
Device:
System:
Enabled
Restore settings from the configuration file on the
USB device if switch is rebooted.
Disabled
Automatically save configuration changes to the
configuration file on the USB device.
10 seconds
- 61 -
1.1.1.1
-
0.0.0.0
Notice + Detail
Notice + Detail
Notice + Detail