Pvids - Buffalo BSL-PS-G2108M User Manual

Chapter 2 Configuration
than 2.)
• In Privacy Separator, the switch's management interface can only be accessed from Uplink ports. If
the port connected to the setup computer is set to be a Downlink port, you will no longer be able
to access the configuration interface.
• If the Privacy Separator is enabled, all existing VLANs are deleted, and it is no longer possible to
create or edit VLANs. All trunking settings are also deleted and disabled.

PVIDs

These settings are used to define PVIDs (Port VLAN IDs).
---> Advanced > VLANs > PVIDs
Parameter
PVID
Meaning
Specify the port VLAN ID. Untagged frames received by each port
here are recognized as being in the specified VLAN number.
Range: 1 to 4094
- 31 -