Buffalo BSL-PS-G2108M User Manual page 31

Chapter 2 Configuration
Parameter
VLANs
ID
Name
Management VLAN
Tagged
Untagged
Not a Member
Restore
Clear
Privacy Separator
Uplink
Downlink
• If the VLAN ID of a received frame is not a VLAN member of the port on which it is received, it is
discarded by the ingress filter.
• If you set a port as Not Member from a certain VLAN, the PVID of the port must also be changed
from the VLAN ID.
(e.g., When you change Port 5 from VLAN 2 to Not Member, change the PVID to something other
Meaning
This displays the current VLAN configuration and PVIDs (Port VLAN
IDs).
The information displayed for each VLAN is the VLAN ID, port
membership attributes, PVID, VLAN name and VLAN Management.
You can also edit a VLAN by clicking Edit or delete it by clicking
Delete.
You cannot delete VLAN 1.
Specify the VLAN number.
Range: 1 to 4094
Specify the VLAN name.
Up to 17 characters including only alphanumeric characters, "-"
(hyphens) and "_" (underscores)
Specify a management VLAN. Only terminals connected to a
management VLAN can access the configuration interface.
Assign a port as a tagged member.
Assign a port as an untagged member.
Indicates that the port as not been assigned as a member.
Reloads the current VLAN settings.
Clears the settings shown.
Enable or disable Privacy Separator (a function enabling
communication from each room to the router, but blocking
communication between each room).
Port used by the router to connect to the Internet. The Uplink port
can communicate with all Downlink ports.
Up to 2 ports can be selected at once.
Connect to each room. Downlink ports can communicate with
uplink ports, but not with each other.
- 30 -