Chapter 2 Configuration
Flow Control
These settings are used to configure the flow control of each port.
---> Basic > Flow Control > Flow Control
Parameter
Name
Allow
Flow Control
EEE
Mode
Jumbo Frames
• When low-power idling (IEEE 802.3az) is enabled, the power consumed when there is no
communication data being sent or received (idle status). However, the other end of the connection
Meaning
The port name may contain up to 16 alphanumeric characters,
hyphens (-), and underscores (_).
Enable or disable the selected port.
Enable or disable flow control.
Enable or disable low-power idling (IEEE 802.3az).
Specify the rate and duplex mode.
Enable or disable jumbo frames on the selected port.
- 18 -