Restore From Usb - Buffalo BSL-PS-G2108M User Manual

Chapter 2 Configuration
Parameter
Enable
IP Address
Attach Header Info
Type
A separate Syslog server is required.

Restore from USB

These settings are used to configure USB settings.
---> Management > Restore from USB
Meaning
Enables transfer of logs to a Syslog server.
Specify the IP address of the Syslog server.
Select the information added to the header of the data sent.
MAC Address:
Include information on the switch's MAC address in the log.
MAC Address and System Name:
Include information on the switch's MAC address and the switch
name in the log.
Select the category of log information sent. There are four log
categories: Configuration, Authentication, Device and System.
None: The log is not transferred.
Notice: Only logs concerning notices are transferred.
Detailed: Only logs concerning information are transferred.
Notice + Detail: All messages are transferred.
- 54 -