Initialize; Mac Address Table (Port Order) - Buffalo BSL-PS-G2108M User Manual

Chapter 2 Configuration

Initialize

This is used to initialize the settings and reboot the switch.
---> Management > Initialize
Parameter
Initialize (except IP)
Initialize
Reset Button

MAC Address Table (Port Order)

This displays the MAC address table in port order.
---> Management > MAC Address Table > Port Order
Meaning
Initializes all settings except the IP address, subnet mask, and
default gateway, and reboots the switch.
Initializes all settings and reboots the switch.
Enable or disable the reset button.
- 49 -