Traffic Storm Control - Buffalo BSL-PS-G2108M User Manual

Chapter 2 Configuration
• If LACP or trunk is set, the ports of the same trunk group must be on the same VLAN.
• If changing the VLAN, the setting is applied to the port with the smallest port number.
• If a broadcast/multicast packet or other data is received before establishing the LACP or trunk, the
switch temporarily forms a loop, and the buzzer may sound due to the loop prevention function.
Operation is performed normally after the LACP or trunk is established.

Traffic Storm Control

These settings are for restricting the occurrence of storms.
When various packets exceed the Rate Limit (threshold) set here, the excess packets are discarded.
---> Advanced > Traffic Storm Control
Parameter
Broadcast
Rate Limit
Multicast
Rate Limit
Meaning
The rate at which broadcasts may pass.
The rate at which multicasts may pass.
- 41 -