Seat Track; Seat Handle (3400 Ce) - Stairmaster MOMENTUM 3400 CE Owner's Manual

•
PARTS REMOVAL AND REPLACEMENT
SEAT HANDLE (3400 CE)
1. Rotate the seat handle counterclockwise until it is unthreaded from
the
seat. Remove the seat handle and washer from the seat slider.
2. On the replacement handle. apply athin layer of grease on the threads
from half way to the end of the threads. Install the washer on the
handle and thread the new handle halfway ihto the seat. Position the
seat in the desired location. Rotate the handle clockwise to secure the
seat.
SEAT TRACK (3800 RC)
3. Ensure that
the
handle does not stick out to the right or left. The
handle is spring loaded so that you can properly align the frame and
the handle. Simply pull out on the handle and rotate it for correct
alignment.
•
1.
Remove the side covers and remove the seat assembly from the seat
track.
Se5 trackc:cwer
•
2. Using a 5/16" allen wrench. loosen and remove the three screws and six
washers that fasten the seat track to
the
main frame. Remove the seat
track from the frame. Reverse the steps to reinstall the seat track.
ScIf!lN
~5475Ie~t 3XZ\~516
SMteveboit
25427
~
\c=.
SMt tRIck
"'1
25418~
Rivnut
3x21Em
I
washer~
3x25253
Washer
3x23729
ScIf!lN
3x27210
Page 54