Console Codes; Custom Codes - Stairmaster MOMENTUM 3400 CE Owner's Manual

•
MOMENTUM SYSTEMS CONSOLE
CONSOLE CODES
There are 5 groups of different codes; Customization [codes start with 3].
Machine Status [codes start with 4]. Diagnostic [codes start with 6or 7].
Configuration [codes start with 8]. and Fitness Testing [codes start with
91.
The
first group of codes are customization codes and are used to set defaults such as
units. language. heart rate input type. etc. The second group of codes are
machine status codes and are used to track hours and other general usage
patterns for maintenance purposes. The third group of codes are diagnostic
codes and are used for troubleshooting. The following key actions are val id in
each group of console codes:
•
• Pressing [LEVEL A]. [first number of code]. [ENTER] displays what
group of codes is being accessed.
• Pressing [SELECT] or [LEVEL A] at that point allows you to view all
possible selections. Once in this mode pressing [LEVEL
vI
backs up
through the selections; pressing [ENTER] then selects that item. If
another test level is available at this point, the [SELECT] / [ENTER]
process is repeated.
• Pressing [AI [first number of code]. [second number of code]. [ENTER]
selects that item directly.
• Pressing [CLEAR] exits any of the special access modes.
5 - 99 minutes,
or
no time limit
USA
or
Metric
Telemetry or Hand
[ 1\] [3] [1
I
Change units
[ 1\] [ 3] [ 2 1 Choose type of heart rate input
[ 1\
II
3
II
3
1-
spare -
[ 1\] [ 3] [ 4 1 Choose console language Gennan, French,
Spanish. Italian, Dutch. Swedish
[ 1\] [ 3] [ 5 1 Change console contrast Increase
or
decrease
[ 1\] [3] [6] Change speed limit Not applicable
[ 1\] [3]
[71 Turn clinical mode on or off
used to allow RPMs
<40
[ 1\
II
3
II
8] - spare -
[ 1\] [ 3] [9] Reset to factory defaults 175Ibs., Intensity
Level 3, 20 min., 30:1 Gear Ratio, English
Custom Codes
[ 1\] [3] [0] Change workout time limit
•
Page 29