BTC-BR User's Manual
1.1 - Accessories
The Tachograph Programmer and Calibrator Siemens VDO Automotive comes in carrying pouch
(handbag) with two compartments, one for packing the tachograph programmer and manual of
operation and other for packing the cables and optical sensors (optional).
The cables consist of 06 parts, as follow:
Cables for testing the KTCO 1318 / KTCO 1310
Cables for testing and programming the MTCO 1390
Cables with claws type alligator for feeding through external source to the vehicle or any other point
than that of cigarette lighter.
Cables for feeding through the cigarette lighter of the vehicle.
Adapter box for benchmarking of mechanical tachograph (use with sensor of 08 or 10 impulses/lap)
Adapter box for Portable Roll Test.
Note: cables 4 and 5 must be connected to the cables 1 or 2, as needed.
1.2 – Applications
Measurement of electronic tachograph MTCO 1390
Measurement of electronic tachograph KTCO 1318 / KTCO 1310
Measurement of mechanical tachograph KTCO 1308
Variable speed test and odometer
Programming date/time on electronic tachograph MTCO 1390 with an error of more than 24hs
Programming the number of chassis, constant "K", odometer, among others, for electronic
tachograph MTCO 1390
5 e 6
Fig. 02: Cables (accessories)