Variable-Speed Test - Siemens BTC-BR User Manual

BTC-BR User's Manual
2.4.8.3 – Variable Speed Test
Steps Contents of the display
1
4. CHECK K MEASUR
5. DEVICE TESTING
6. PROGRAMMING
5 6
( ) – Scroll
/
1. DIST COUNT TEST
2
2. TEST CHART
3. VARIABLE SPEED ←
5
( ) – Scroll
VARIABLE SPEED
3
MTCO
KTCO
5 6
( / ) - Scroll
4
VARIABLE SPEED
K = [08000] P/Km
(E) – Speed Adjust
VARIABLE SPEED
5
K = [08000] P/Km
S = [100] Km/h
(E) – Start
VARIABLE SPEED
6
K = [08000] P/Km
S = [100] Km/h
(E) – Speed Adj
VARIABLE SPEED
7
K = [08000] P/Km
S = [060] Km/h
(E) – Start
Keys
←
E
(E) Enter
E
(E) Enter
←
E
(E) Enter
E
(C) Exit
E
(C) Exit
E
(C) Exit
C
Procedures
Select Device Testing
This function will access a sub-menu in which
will be possible to measure the indication of
the odometer, to generate a test chart and
inject a signal of speed previously known.
Select Variable Speed
In this function will be possible to generate a
signal of speed and change it gradually from
more to less, observing the behavior of the
indicator (speedometer).
Select MTCO or KTCO
This function prepares the Calibrator to
generate a signal of speed compatible
with the selected tachograph.
Enter the value of the constant "K" readed
in the step 2.4.5 (Check "K" Measuring).
Enter the value of speed that you want the
tachograph indicate, observing the value of the
scale range. Press E to the test operates.
By activated the test, the value of speed can not
be edited more, only by pressing E again. By
pressing the button E it will be possible to adjust
the value of speed. In this moment is released
the editing mode to the desired value.
14