Download Print this page

Functions Available; Using The Keyboard - Siemens BTC-BR User Manual

Tachograph programmer and calibrator
Hide thumbs

Advertisement

BTC-BR User's Manual
2 – Functions Available
In this chapter will be detailed all the functions available in portable tachograph programmer, some
common to both lines of tachograph, KTCO e MTCO. All functions are accessed through the alpha-
numerical keyboard and then will be seen as using it.
All data entry is highlighted with underscore characters indicating that the
"edition" mode will be active.
2.1 – Using the Keyboard
5 6
⇒ direction of the cursor (Menu)
3 4
⇒ direction of the cursor (Edition)
⇒ confirms operation
E
⇒ cancel operation or return to the previous
C
menu
⇒ clean a field of data, letters and numbers
L
(edition mode)
F1 ⇒ use only in some cases, being specified
when this occurs
F2 ⇒ return the keyboard to the numerical mode,
i.e., numbers 0-9, "." and "+/-" ( edition mode)
F3 ⇒ use characters from A to M of the keyboard,
located at the top left of the numerical
keyboard. The yellow led, corresponding to
this selection, will be lit, showing that this
function is enabled (edition mode)
F4 ⇒ use characters from N to Z of the keyboard,
located at the top right of the numerical
keyboard. The green led, corresponding to this
selection, will be lit, showing that this function
is enabled (edition mode)
6

Advertisement

loading

  Related Manuals for Siemens BTC-BR

This manual is also suitable for:

Vdo btc-br