Table of Contents
Advertisement
DVI Converter
ODC-10000
2.
Network Connection
1)
Connect LAN cable from the network to the Ethernet port of DVI Converter.
2)
Perform 1) ~ 4) steps of 4-3. 1.
3)
Type in IP address directly and click "Set TCP/IP"
If you use a static IP address, contact to your system administrator.
※
4)
Turn off the power of DVI Converter and turn it on.
5)
Press "CTRL_SET" button in the front side of DVI Converter to turn on LED. When the
UP
ID SET
LED is turned on, Ethernet communication mode is available.
DVI 1
LEFT
RIGHT
SEL DVI 1
MENU
SEL DVI 1
CTRL SET
IP SET
CTRL SET
DOWN
14
| ORION PDP CO., LTD.
UP
ID SET
DVI 2
LEFT
RIGHT
SEL DVI 2
MENU
SEL DVI 2
IP SET
DVI Converter
DOWN
6)
Execute MSCS V. 5.0 and insert IP address at Coomunication/Setup. Execute Pingtest to
check communication satus.
7)
Execute MSCS V. 5.0 and insert IP address at Coomunication/Setup. Execute Pingtest to
check communication satus.
DVI 2
DVI Converter
Infinitely Expandable
ORION PDP CO., LTD. |
15
Advertisement
Table of Contents
