Table of Contents
Advertisement
DVI Converter
ODC-10000
5-3.
How to use MSCS (Multi Screen Control Software)
„
Introduction
x
MSCS Ver. 5.0 is software to control DVI Converter.
x
DVI converter can be controlled by a computer with MSCS.
Main Image of MSCS (Multi Screen Control system)
1.
Program End
x
Click Exit from File (Ctrl+X) to end the program.
26
| ORION PDP CO., LTD.
2.
Setting 'Com Port'
x
Com Port connects or disconnects the communication between DVI Converter and
MPDP.
x
Connet MPDP to DVI Converter Com Port via RS-232C cable.
x
Go to MSCS Menu -> Communication and set Com Port.
Click 'Connect' or Press 'Ctrl+C' to initiate the communication between the
computer and the DVI Converter.
x
In order to disconnect communication, click 'Disconnect' using mouse or press 'Ctrl+D'
using keyboard.
x
Connect:
Connect the communication between the computer and the DVI Converter.
x
Disconnect the communication between the computer and the DVI
Disconnect:
Converter.
x
Configure the Serial port of a computer to communicate with DVI Converter.
SetUp:
e.g. COM1, COM17 ...
Communication configuration
Sub-Communication
Baud Rate
115200 bps
Data Bit
8 Bits
Stop Bit
1 Bit
Parity Bit
None Parity Bit
Infinitely Expandable
ORION PDP CO., LTD. |
27
Advertisement
Table of Contents
