Table of Contents
Advertisement
DVI Converter
ODC-10000
Auto Calibration function
x
Auto Calibration is the automatic function to adjust the color coordinates of RGB, DTV
or DVD inputs for obtaining the closet value with the white balance value that adjusted
by DVI. In case the manual adjustment of white balance for RGB, DTV or DVD inputs is
impossible or difficult, it is recommended that using only "Auto Calibration" for white
balance adjustment.
x
Auto calibration is only applicable for RGB, DTV or DVD. It is recommended that using
the function after adjusting white balance. If white balance is not adjusted prior to Auto
calibration, it follows the color coordinates of the previous color coordinates DVI output.
x
100% saturation 8 color bar signals of SMTPE standard should be inputted for Auto
calibration.
x
The standard signal for RGB input is 8 color-bar signal with XGA 60Hz resolution, 8
color-bar signal with 1080i 60Hz resolution for DTV input and 8 color-bar signal with
480i 60Hz resolution for DVD input.
x
If the signal is not satisfy the 8 color bar signal standard, Auto calibration may not work
properly. The input signal level of RGB, DTV and DVD should be 1.5V at white. Please
refer to following examples for the standard signal wave.
8 color bar output
38
| ORION PDP CO., LTD.
PIP( Picture In Picture )
„
x
A variety of images can be displayed with the PIP function of DVI converter. To activate
PIP, click "PIP" in the Mode. The position of sub-picture can be controlled by clicking - /
+ buttons o increase or decrease the number or directly type in the numbers at Edit box.
x
Various input sources can be used. To set the sub-input, click the sub-input combo box
and select sub-input.
x
Main screen and sub-screen can be swapped with the PIP Swap function. Press "Set"
button at the right side of "PIP Swap." If you want to return to previous screen, press
"Normal" button at the right side of "PIP Swap".
x
Mode :
Normal mode - Normal screen without PIP (PIP Off)
PIP mode-Sub-screen is displayed at the lower right corner of the screen. (PIP
On)
x
Position :
Horizontal - Adjust the horizontal location of PIP. Adjustable range 0~100
Vertical - Adjust the vertical location of PIP. Adjustable range 0~100
x
Sub Input :
Set the input for PIP. One of DVI, HDMI, HDSDI, PC, DTV, S-VIDEO, and
VIDEO can be selected for sub-input.
※
According to the main input, the sub-input can be restricted. If the main input is a
digital input such as DVI, HDMI or HD-SDI, the sub-input should be an analog input
such as PC, DTV, S-VIDEO or Video. If the main input is an analog input the sub-
input should be a digital input.
x
OFF - Return to previous locations of swapped Main Source Input screen
PIP Swap :
and Sub Source Input screen.
ON - Exchange the locations of Main Source Input screen and Sub Source
Input screen.
x
Cution : In case the output resolutions are 1600x1200-60Hz, 1080P-50Hz, or
1080P-60Hz, PIP function is not available.
So, PIP mode menu will be inactivated for the output resolutions of
1600x1200-60Hz, 1080P-50Hz, or 1080P-60Hz.
Infinitely Expandable
ORION PDP CO., LTD. |
39
Advertisement
Table of Contents
