Table of Contents
Advertisement
DVI Converter
ODC-10000
6)
Click "Set TCP/IP info."
7)
Turn off the power of DVI Converter and turn it on.
8)
Press "CTRL_SET" button in the front side of DVI Converter to turn on LED. When the
UP
ID SET
LED is turned on, Ethernet communication mode is available.
DVI 1
LEFT
RIGHT
SEL DVI 1
MENU
SEL DVI 1
CTRL SET
IP SET
CTRL SET
DOWN
12
| ORION PDP CO., LTD.
UP
ID SET
DVI 2
LEFT
RIGHT
SEL DVI 2
MENU
SEL DVI 2
IP SET
DVI Converter
DOWN
9)
Select "TCP/IP" at "Start - Control Panel
values of DVI Converter in the IP address. The Subnet Mask value should be identical
with DVI Converter.
10)
Execute MSCS V. 5.0 and insert IP address at Coomunication/Setup. Execute Pingtest
to check communication satus.
DVI 2
DVI Converter
Infinitely Expandable
Network" and type the Gateway
ORION PDP CO., LTD. |
13
Advertisement
Table of Contents
