Test Pattern - Orion ODC-10000 User Manual

DVI Converter
ODC-10000
3.3.

Test Pattern

- Checking the image quality of DVI Converter with the built-in pattern
- It is available only during Power on status.
- Send to MPDP
STX CMD Length
Value 0x02 0x96 0x03
* ID range (Program): 0x65(101) ~ 0x6D(109)
* Ch1/Ch2: Channel1 (0x01), Channel2 (0x00)
* Value:
x Screen (0x01), White (0x02), Red (0x03), Green (0x04), Blue (0x05), 8-Color (0x06), 10%-White (0x07),
16-Gray (0x08)
- Receive from MPDP
STX CMD Length
Value 0x02 0x96 0x02
* ID range (Program): 0x65(101) ~ 0x6D(109)
* Ch1/Ch2: Channel1 (0x01), Channel2 (0x00)
* Check Sum: Add all the values of "STX ~ Data" and execute "Not" operation.
- "Test Pattern" Communication Sequence
* Wait for the response for 40msec after sending commands. In case of response failure, it is recommended to
send the command again.
* It is recommended not to give the other command or change the resolution during transmission.
* ALL DVIC command is executed Channel2 and Channel1 sequentially. (Channel2 → Channel1)
Test Pattern Command transmission (to Ch2)
Test Pattern Command transmission (to Ch1)
3.4. Key Lock Mode
- The command for restricting Front Key function of DVI Converter
- It is available only during Power on status.
- Send to MPDP
STX CMD Length
Value 0x02 0x5C 0x03
* ID range (Program): 0x65(101) ~ 0x6D(109)
* Ch1/Ch2: Channel1 (0x01), Channel2 (0x00)
44 | ORION PDP CO., LTD.
Data
ETX
ID Ch1/Ch2 Value
Variable Variable Variable 0x03
Data
Check Sum ETX
ID Ch1/Ch2
Variable Variable Variable 0x03
→
Test Pattern Response transmission (from Ch2)
←
→
Test Pattern Response transmission (from Ch1)
←
Data
ETX
ID Ch1/Ch2 Value
Variable Variable Variable 0x03
* Value: Key Lock Mode On (0x01), Key Lock Mode Off (0x02)
- Receive from MPDP
STX CMD Length
Value 0x02 0x5C 0x02
* ID range (Program): 0x65(101) ~ 0x6D(109)
* Ch1/Ch2: Channel1 (0x01), Channel2 (0x00)
* Check Sum: Add all the values of "STX ~ Data" and execute "Not" operation.
- "Key Lock Mode" Communication Sequence
* Wait for the response for 40msec after sending commands. In case of response failure, it is recommended to
send the command again.
* It is recommended not to give the other command or change the resolution during transmission.
* ALL DVIC command is executed Channel2 and Channel1 sequentially. (Channel2 → Channel1)
Key Lock Mode Command transmission (to Ch2)
Key Lock Mode Command transmission (to Ch1)
3.5. PIP Mode
- The command for PIP function of DVI Converter
- It is available only during Power on status.
- Send to MPDP
STX CMD Length
Value 0x02 0x98 0x03
* ID range (Program): 0x65(101) ~ 0x6D(109)
* Ch1/Ch2: Channel1 (0x01), Channel2 (0x00)
* Value: Normal (0x01), PIP Mode (0x02)
- Receive from MPDP
STX CMD Length
Value 0x02 0x98 0x02
* ID range (Program): 0x65(101) ~ 0x6D(109)
* Ch1/Ch2: Channel1 (0x01), Channel2 (0x00)
* Check Sum: Add all the values of "STX ~ Data" and execute "Not" operation.
- "PIP Mode" Communication Sequence
* Wait for the response for 40msec after sending commands. In case of response failure, it is recommended to
send the command again.
* It is recommended not to give the other command or change the resolution during transmission.
Infinitely Expandable
Data
Check Sum ETX
ID Ch1/Ch2
Variable Variable Variable 0x03
→
Key Lock Mode Response transmission (from Ch2)
←
→
Key Lock Mode Response transmission (from Ch1)
←
Data
ETX
ID Ch1/Ch2 Value
Variable Variable Variable 0x03
Data
Check Sum ETX
ID Ch1/Ch2
Variable Variable Variable 0x03
ORION PDP CO., LTD. | 45