Specification - Orion ODC-10000 User Manual

DVI Converter
ODC-10000
7.
Check followings before asking for
service
Before calling for any repair, check the following and then refer to the store or
dealership where you purchased this product.
1. In case you cannot control DVI converter with MSCS.
- Check the RS-232C cable connection. Check the IN and OUT of RS-232C Port at the
rear side of DVI Converter.
- Check the channel connection of MSCS. You can check the LEDs on "SEL_DVI1" and
"SEL_DVI2" buttons at the front side of DVI Converter.
- Check the LED of "CTRL_SET" button at the front side of DVI Converter. If the LED is
turned on, it is Ethernet mode and Serial control is not working. It should be turned off.
2. In case you cannot control DVI converter with the Front Keys at the
front side of DVI Converter.
- Check DVI1 Status Display or DVI2 Status Display.
If there is "Lock" is shown at the right side of the first line on the LCD, Key Lock Mode
is on.
In that case, Front Key is not functioning. To use Front Key, turn off Key Lock Mode at
MSCS.
- Check the channel connection of MSCS. You can check the LEDs on "SEL_DVI1" and
"SEL_DVI2" buttons at the front side of DVI Converter.
3. In case you have no screen image of the display devices.
- Check the connection of the output channel of DVI Converter and the input of display
devices.
60 | ORION PDP CO., LTD.
8.

Specification

Product Name
Power supply 100 ~ 250V AC, 50/60Hz
Power consumption 40W (MAX)
DVI Converter Size 405mm(W) X 250mm(D) X 60mm(H)
Environmental Condition 0℃ ~ 40℃, 20 ~80% RH
Weight 3Kg
Input/Output Specification
Terminal Name
Composite Video BNC 1Pin
S-Video DIN 4Pin
Component Video BNC 3Pin
Analog RGB D-Sub 15Pin
Video Input Signal
DVI-D 24Pin
DVI / HDMI
/HDMI 29Pin
SDI BNC 1Pin
Video Output Signal DVI DVI-D 24Pin
D-Sub 9Pin
RS-232C
(Female)
Ethernet RJ-45
Control Method
Key Pad
Display STN LCD 2X16
※ Specification can be changed without prior notice to improve product quality.
Infinitely Expandable
Specification
Terminal Specification
NTSC, PAL, SECAM
NTSC, PAL, SECAM
480i, 576i, 480p, 576p, 720p, 1080i, 1080p
VGA, SVGA, WVGA, XGA, SXGA, WXGA, UXGA
Horizontall Freq. : 15.5Khz ~ 75Khz
Vertical Freq. : 50/60Hz
480p, 576p, 720p, 1080i, 1080p
VGA, SVGA, WVGA, XGA, SXGA, WXGA, UXGA
Horizontall Freq. : 15.5Khz ~ 75Khz
Vertical Freq. : 50/60Hz
SMPTE 259M-C, SMPTE 292M,
SMPTE 424M, SMPTE 425 (Level A & B)
640X480-60/85, 800X600-50/60/85, 853X480-
50/60, 1027X768-60/85, 1280X1024-
50/60, 1600X900-50/60, 1600X1200-50/60,
1706X960-60, 1080p-50/60
Baud Rate : 115200
Max ±15V
TCP/IP
Input Souce Select Hot Key, Output Resolution
Select Hot Key, Navigation Key(OSD), Control
Channel Select, Communication Method Select.
Input Souce, Output Resolution, Key Lock Status
Display
ORION PDP CO., LTD. | 61