Orion ODC-10000 User Manual page 25

DVI Converter
ODC-10000
* ALL DVIC command is executed Channel2 and Channel1 sequentially. (Channel2 → Channel1)
PIP Mode Command transmission (to Ch2)
PIP Mode Command transmission (to Ch1)
3.6. PIP Position
- The command for controlling the PIP screen position
- It is available only during Power on status.
- CMD: 0x5D ( PIP H. Position), 0x5E (PIP V. Position)
- Send to MPDP
STX CMD Length
Value 0x02 Variable 0x03
* ID range (Program): 0x65(101) ~ 0x6D(109)
* Ch1/Ch2: Channel1 (0x01), Channel2 (0x00)
* Value:
x PIP H. Position: 0 (0x00) ~ 100 (0x64)
x PIP V. Position: 0 (0x00) ~ 100 (0x64)
Receive from MPDP
-
STX CMD Length
Value 0x02 Variable 0x02
* ID range (Program): 0x65(101) ~ 0x6D(109)
* Ch1/Ch2: Channel1 (0x01), Channel2 (0x00)
* Check Sum: Add all the values of "STX ~ Data" and execute "Not" operation.
- "PIP Position" Communication Sequence
* Wait for the response for 40msec after sending commands. In case of response failure, it is recommended to
send the command again.
* It is recommended not to give the other command or change the resolution during transmission.
* ALL DVIC command is executed Channel2 and Channel1 sequentially. (Channel2 → Channel1)
PIP Position Command transmission (to Ch2)
PIP Position Command transmission (to Ch1)
46 | ORION PDP CO., LTD.
→
PIP Mode Response transmission (from Ch2)
←
→
PIP Mode Response transmission (from Ch1)
←
Data
ETX
ID Ch1/Ch2 Value
Variable Variable Variable 0x03
Data
Check Sum ETX
ID Ch1/Ch2
Variable Variable Variable 0x03
→
PIP Position Response transmission (from Ch2)
←
→
PIP Position Response transmission (from Ch1)
←
3.7. PIP Swap Mode
- The command for interchanging the positions of main picture and sub picture.
- It is available only for PIP mode during Power on status.
- Send to MPDP
STX CMD Length
Value 0x02 0x99 0x03
* ID range (Program): 0x65(101) ~ 0x6D(109)
* Ch1/Ch2: Channel1 (0x01), Channel2 (0x00)
* Value:
x Normal Mode (0x01) - Main picture and Sub picture are displayed without position change.
x Swap Mode (0x02) - The positions of Main picture and Sub picture are interchanged.
- Receive from MPDP
STX CMD Length
Value 0x02 0x99 0x02
* ID range (Program): 0x65(101) ~ 0x6D(109)
* Ch1/Ch2: Channel1 (0x01), Channel2 (0x00)
* Check Sum: Add all the values of "STX ~ Data" and execute "Not" operation.
- "PIP Swap" Communication Sequence
* Wait for the response for 40msec after sending commands. In case of response failure, it is recommended to
send the command again.
* It is recommended not to give the other command or change the resolution during transmission.
* ALL DVIC command is executed Channel2 and Channel1 sequentially. (Channel2 → Channel1)
PIP Swap Command transmission (to Ch2)
PIP Swap Command transmission (to Ch1)
3.8. PIP Input-Mode Change
- The command for changing PIP Input mode without screen scaling.
- It is available only for PIP mode during Power on status.
Infinitely Expandable
Data
ETX
ID Ch1/Ch2 Value
Variable Variable Variable 0x03
Data
Check Sum ETX
ID Ch1/Ch2
Variable Variable Variable 0x03
→
PIP Swap Response transmission (from Ch2)
←
→
PIP Swap Response transmission (from Ch1)
←
ORION PDP CO., LTD. | 47