Names Of Parts; External View; Cross Section - Canon DADF-M1 Service Manual

Chapter 1
*1: To enable extra-length mode, use the following service mode item: COPIER>OPTION>USER>MF-LG-SET; to enable, select '1'; to disable, select '0',which
is the default.

1.2 Names of Parts

1.2.1 External View

1 Feeder cover
2 Lower left cover
3 Rear cover
4 Slide guide
5 Original pickup tray
6 Original delivery assembly
7 Front cover

1.2.2 Cross Section

1 No. 2 registration roller, lower
2 No. 2 registration roller, upper
3 Reversing roller, lower
4 Reversing roller, upper
5 No. 1 registration roller, lower
6 No. 1 registration roller, upper
7 Separation roller
8 Pickup roller
9 Read roll 1
10 Read roller 1
11 Platen roll 1
12 Platen roller
13 Platen roll 2
14 Read roller 2
15 Read roll 2
16 Delivery reversing roller, lower
17 Delivery reversing roller, upper
1-2
Operating environment same as host machine
temperature
humidity
[3]
[2]
[1]
[1] [2] [3] [4] [5]
Read
Sensor
PI9
PI2
[9] [10][11][12][13][14][15] [16] [17]
[4]
F-1-1
[6] [7] [8]
PI6
PI5
PI1
Separation
rear Sensor
F-1-2
[5]
[6]
[7]
PI4
PI3
0002-7211
0002-7213