The Calendar Timer - Oce VarioPrint 2100 User Manual

The calendar timer

Introduction
The Océ VarioPrint
ready when you start your working day. This timer is the 'Calendar timer'. When this
timer is enabled, you can set the wake-up time of the system. The system will then
wake up at the indicated time. The factory default is 08:00.
You can set a wake-up time for 'Monday - Friday', 'Saturday' and 'Sunday' separately.
Note that the system needs some time to warm up.
The 'Calendar timer' setting is located in the Océ VarioPrint
Editor.
Before you begin
Open your web browser.
1.
Enter the URL of the Océ Smart Imager in your web browser.
2.
Select the 'Key operator' mode or the 'System administrator' mode.
3.
Enter the required PIN or password.
4.
How to enable the calendar timer
Click the 'Settings' tab.
1.
Click 'Calendar timer'.
2.
Click the check box for 'Enabled' for the timers you want to enable.
3.
A check mark indicates that the 'Calendar timer' function is enabled.
Click 'Apply'.
4.
How to disable the calendar timer
Click the 'Settings' tab.
1.
Click 'Calendar timer'.
2.
Uncheck the check box for 'Enabled' for the timers you want to disable.
3.
An empty check box indicates that the 'Calendar timer' function is disabled.
Click 'Apply'.
4.
®
2100/2110 has a timer that enables you to have your system
The calendar timer
®
2100/2110 Settings
57