The Information In The Media Section - Oce VarioPrint 2100 User Manual

The information in the media section

Introduction
Information for operators, key operators
The media section of the main screen displays information about the media in the
paper trays. The information displayed is the programmed media name and the
detected size and orientation in the paper trays. This information can be in two
colours, orange and black.
The colours mean the following.
Black The size of the programmed media equals the size detected in the paper
tray
Orange The size of the programmed media does not equal the size detected in
the paper tray.
You can set the media characteristics in the 'Media catalogue'. Here you must enter
the media names, the sizes and the types, for example 'Normal', 'Tab sheet' or 'Special
front'.
The link between a certain media type and the paper tray is made in the 'Paper
manager'. When you fill a paper tray, you can set the media type here
media type on page
catalogue'. Media that matches the size detected for a paper tray is displayed in
black. The media types of the 'Media catalogue' that do not match the size detected
for that paper tray are displayed in orange. You can select a media type from the
displayed list for each paper tray.
Note: When the programmed media does not match the detected size, a mismatch is
displayed. The media name turns orange. There is one exception. If the programmed
media is oversize media, the system does not display a mismatch.
68. The 'Paper manager' displays the list entered in the 'Media
The information in the media section
Set the needed
65