Displaying Recording Data - Sony DVCAM DSR-200P Operating Instructions Manual

Displaying recording data

You can display the recording data (date/time or various settings when recorded
Code)), on the TV during playback or editing. The Data Code is also displayed in the
viewfinder and the display window.
Press DATA CODE on the Remote Commander while playing back. Each time you
press DATA CODE, the indicator cycles in the viewfinder as follows:
When you select DATE/CAM from the menu [a]:
recorded date and time n various settings n no indication
When you select DATE from the menu
recorded date and time n no indication
Press DATA CODE repeatedly to erase the display.
When bars (--:--:--) appear
• A blank portion of the tape is being played back.
• The tape was recorded by a digital camcorder without the Data Code function.
• The tape was recorded by a digital camcorder without having date and time set.
[b]:
[a]
4 7 1997
10:13:02
DATA CODE
AUTO
5 0 ATW
F1.6 0dB
DSR-200P CE 3-858-622-12(1). E
(Data
[b]
4 7 1997
10:13:02
73