Table of Contents
Advertisement
3-7 Detailed Settings of
the Switch Functions
By using the <SWITCH ASSIGN> page of the USER
(OPERATION) menu displayed on the viewfinder/monitor
screen, the operation mode of the MENU SEL/ENTER
dial in addition to function assignment to the assignable
buttons/switch that can also be made on the subdisplay.
<SWITCH ASSIGN> page
< S W I T C H A S S I G N >
A S S I G N S W 1 :
A S S I G N S W 2 : O F F
A S S I G N S W 3 : O F F
A S S I G N S W 4 : O F F
R E _ R O T A T I O N : S T D
Assigning functions to the assignable
buttons/switch
When you position the pointer to any of the ASSIGN SW1
to ASSIGN SW4 lines and push on the MENU SEL/
ENTER dial, the subpage to set the corresponding button/
switch is displayed.
You can assign the same functions as those when you
operate the subdisplay.
For the assignable functions, see "3-2-10 Allocation of
Functions to the Assignable Buttons and Switch" (page
35).
Setting subpage for assignable button 1
A S S I G N S W 1
O F F
B
N D
R E C R E V I E W
P B ( V F )
V F 7 0 9 G A M
M O N I 7 0 9 G A M
F A N M O D E
G A I N - 9 / - 1 8 d B
The setting subpages for button 2 and 3 have the same
layout as that for button 1.
48
Detailed Settings of the Switch Functions
U 1 3
O F F
B
E S C
Setting subpage for assignable switch 4
A S S I G N S W 4
O F F
B
A W B
B A R S
T E S T 1
Position the pointer to the function to be assigned and push
on the MENU SEL/ENTER dial.
Setting the operation mode of the MENU
SEL/ENTER dial
You can reverse the operation corresponding to the
directions of rotation of the MENU SEL/ENTER dial on
the camera head and that on the assistant panel.
Setting
Operation
STD (default)
Clockwise rotation moves the pointer/
cursor down or increases values on a
menu/subdisplay page.
RVS
Clockwise rotation moves the pointer/
cursor up or decreases values on a menu/
subdisplay page.
E S C
Advertisement
Table of Contents
