Name And Function Of Front - Ikegami IK-H750V User Manual

Name and Function of Front

17 " LCD Monitor
SOURCE BUTTON
MENU/EXIT BUTTON
SELECT/ AUTO BUTTON
6 - English
Front panel
19 " LCD Monitor
VOL / MUTE BUTTON
/ + BUTTON
/ -
BUTTON
POWER BUTTON
(Power indicating LED)
Power button
Power button is located in the lower center of the Front Bezel.
You can push the button to turn on/off the power.
Power Indicating LED
Dark : Power off
Green : Normal mode
Green blinking : DPMS mode or Check Signal Cable mode.
On-Screen Display (OSD) Function Button
OSD buttons on the front of bezel perform the following functions.
SOURCE : Monitor displays source of the signal in order ( PC
MENU/EXIT : Press this button to display menus. If you press this button when
OSD is displayed, you can switch display to the previous menu and
exit menu.
SELECT/ AUTO : Press this button, when OSD is not displayed, to perform
automatic setting. (only PC Mode.)
When OSD is displayed, You can select icons.
POWER : Power button.
+/ -/ : By pressing these buttons when OSD is displayed, you can move
cursor into the menus which you want.
After pressing the SELECT button, you can change gauge level or
select submenus.
When OSD is not displayed, you can adjust brightness or contrast.
VOLUME / MUTE : Press this button for volume control. When control is displayed,
you can control mute by pressing this button.
Functions
CVBS S-VHS )
English - 7