Power Management Feature; Adjusting Osd - Ikegami IK-H750V User Manual

Power Management Feature

The monitor is equipped with a power saving circuit that
confirms to the world-standard Display Power Manager Signalling
(DPMS) mode of Video Electronics Standard Association (VESA).
The power management feature requires that the video card of the
computer should support DPMS function.
Status LED Sign
Normal mode Green ON
DPMS mode Green Blinking
DPMS with Audio
Mute ON
Mute OFF
No image is displayed with
Monitor is in power saving mode.
Use mouse or keyboard to release power saving mode.
No image is displayed without
Power cable plug must be pulled out.
Check the power plug on monitor and on the wall.
"Out of range" displayed on the screen.
This message is displayed when the signal from video card exceeds the
maximum frequency of the monitor. Readjust resolution and frequency in
accordance with the monitor capacity. (Refer to Standard Signal Table)
8 - English
Power Consumption
Normal Power
3W or Below
3W or Below
5W or Below
Green
blinking.
LED
on.

Adjusting OSD

-
P C M O D E
MENU
1. Press the MENU button to access main menu.
2. Use
3. Press SELECT button into the submenu.
1. Use
2. Press SELECT button to select it.
3. Use
1. Use
2. Press SELECT button to select it.
3. Use
Brightness / Contrast
SELECT
to move Brightness / Contrast ICON.
Brightness
SELECT
to move Brightness ICON.
to adjust the brightness of the screen.
Contrast
SELECT
to move Contrast ICON.
to adjust the contrast of the screen.
English - 9