Connection To Signal Source; The Range Of Control Angle - Ikegami IK-H750V User Manual

Connection to Signal Source

< Power source connection >
1. Use 220 V or 110 V. (Free Voltage)
2. Connect monitor and Signal Source via Signal cable
3. Power on the monitor and computer.
4. Connection is finished.
4 - English
Basic Connection
Port for AC power cable.
Port for BNC output
Port for BNC input
Port for S-VHS input
Port for Audio input
Kensington Lock
Port for signal cable from signal source.
< Signal cable connection>
General
For Macintosh
Adapter for Macintosh (Optional)
Refer to the table on the rear side of
the optional Macintosh adapter and
adjust DIP switch by the resolution.

The range of control Angle

How to Adjust the Stand - 17"
Forward 3
How to Adjust the Stand - 19"
Forward 5
Default Backward 30
Default Backward 33
English - 5