Configuration Tool; The Configuration Tool; Computer Environment - Oce OP1030 Operation Manual

3-6 Configuration Tool

3-6-1 The Configuration Tool

The Configuration Tool is used for performing settings related to your IP address. This tool enables you to
use the same procedures to manage the network settings for our printer and scanner models. In this
section, basic information for understanding the "Quick Setup Wizard" and the basic procedure for using
"AdminManager" are explained.
• Quick Setup Wizard ........... Enables quick set-up of those settings required in the Scanner Interface Card.
• Advanced Set-up ................ Installs AdminManager and enables more advanced settings.

3-6-2 Computer Environment

• Hardware ............................ IBM PC/AT or compatible
• Interface ............................. 10BASE-T or 100BASE-TX
• OS ...................................... Windows 95 (OSR2), Windows 98 (Second Edition),
Windows NT 4.0 (Service Pack 5 or later),
Windows 2000,
Windows Me or Windows XP
Page 3-119