Oce OP1030 Operation Manual page 79

2-6 System Setting
• SMTP Authentication
• Change Password
• New Password
• Confirm new password
• Registration button
• Reset button
• Delete button
Enter Login Account Name to use for User's SMTP Authentication.
In order to set the SMTP Authentication for each user, the setting for SMTP Authentication must be
performed under System Basic setting in advance. (Refer to page 2-17)
If you want to change the User's SMTP Authentication password, select Yes. If you do NOT want to
change it, select No.
If you want to change the password to use for Use's SMTP Authentication, type a new password into this
field (up to 8 characters).
Type the same password as you did in the New Password field in here.
* This procedure is necessary in order to ensure that the password was entered correctly.
Click on this button to have all the selected settings registered in the scanner. If you move to the next page
without clicking on the Registration button, any settings that have not been properly registered will be
deleted.
Click on this button to return all of the settings back to their factory default values.
Click on this button to delete the displayed user.
Page 2-26