Oce OP1030 Operation Manual page 47

1-3 Using the Scanner Function
2 . "Scan to PC-Sending" will be displayed on the left side of the Scan to PC screen shown in step 1. This
3 . "Scan to PC-Continuous TX" will now be displayed on the left side of the Scan to PC screen. This
indicates that you are using the standard transmission mode. To switch to the Continuous Sending
function, touch the "Contin. TX to" key.
indicates that you are now using the Continuous Sending function. To switch back to standard
transmission, touch the "Sending to" key.
Page 1-28