Oce OP1030 Operation Manual page 144

3-3 Address Editor
<Black and White mode>
<Color/Monochrome (Gray) mode>
<Universal mode>
1. Resolution ..................... You can select from among the following 4 scanning resolutions: 200 dpi,
2. File Type ........................ Sets the file format at which scanned data will be saved: TIFF or PDF
3. Orig. image quality ....... You can select from among the following 4 original types in order to suit the
4. Resolution ..................... You can select from among the following 4 scanning resolutions: 200 dpi,
5. File Type ........................ Sets the file format at which scanned data will be saved: JPEG, TIFF or PDF
6. JPEG image quality ...... You can select the quality level of the JPEG file that will be created from the
7. Output color type .......... You can select between the following 2 types of color data: RGB and sRGB
8. Multiple Scanning ......... You can select whether to turn the continuous scanning function "ON" or
9. File Name ....................... Sets the file name for saving scanned data.
300 dpi, 400 dpi and 600 dpi
originals that are being scanned: Photo, Text, Text+Photo and OCR
300 dpi, 400 dpi and 600 dpi
scanned data.
* The higher the image quality is, the larger the resulting file size (data
volume) will become.
* If you select "sRGB" it is possible to match the color space of different
sRGB-compatible machines.
"OFF".
* The file name can be up to 8 single-byte characters in length.
Page 3-47