Oce OP1030 Operation Manual page 72

2-6 System Setting
[IP-Filters]
This scanner offers the capability to filter IP raffic by source address, allowing only authorized addresses
access to specific protocols. For example, an IP filter could be set for HTTP/ Address Editor so only
specific addresses could access the scanner Home pages and Address Editor.
Filtering up to 4 IP address ranges is available for each of the following protocols:
HTTP / Address Editor, TELNET, AdminManager, TWAIN, NETWORK FAX (Only a model for Fax option installation)
IP Filters may be configured using Address Editor or the scanner Home pages. The procedure below
describes using a web browser for configuration.
1. Open the scanner Home page by entering the scanner's IP address in the web browser.
2. Select the System Basic Setting on the menu frame.
3. Select the [IP-Filters] on the main frame.
Page 2-19