Oce OP1030 Operation Manual page 138

Scan system functions
Hide thumbs Also See for OP1030:
Table of Contents

Advertisement

3-3 Address Editor
15. SMTP Server name ....... Type the IP address of the SMTP server in this field in the following form:
16. SMTP Port No. ............... Register the SMTP port number in this field. The port unmber of the initial
17. DB Assistant ................. Type the IP address or the host name of the PC which DB Assistant is
18. Firmware Updates ......... If you allow "Update", select "ON". If you do NOT allow it, select "OFF"..
[Administrator Setting]
19. E-mail Address .............. Type the administrator's email address of the in this field.
20. Change Password
21. SMTP Authentication
XXX.XXX.XXX.XXX or type the host name of the SMTP Server (up to 32
single-byte characters) in this field.
mode is 25.
installed (up to 32 single-byte characters) in this field.
* The email address can be up to 64 single-byte characters in length.
button .............................. Click on this button to set the administrator password. (Refer to page 3-42)
button .............................. Click on this button to set SMTP Authentication (for Administrator).
(Refer to page 3-43)
Page 3-41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Op1040Op1050Op25Op35Op40

Table of Contents