Oce OP1030 Operation Manual page 78

2-6 System Setting
• E-mail address
• Address of PC with "Address Book" installed
• Save number
* It is possible to designate a "save number" between 001 and 100.
• Signature
• Change password
• Old password
• New Password
• Confirm new password
The email address of the user can be up to 64 single-byte characters in length.
Type the host name or IP address of the computer that contains this user's personal Address Book into
this field.
Type the "save number" that corresponds to the destination computer that will be used under the Scan to
PC function into this field.
Type the data (personal information) that will be transmitted with the email message into this field.
If you want to change the administration password, select "Yes". If you do NOT want to change it, select
"No".
If a password is currently registered, type that password into this filed.
If you want to change the administration password, type a new password into this field (up to 8
characters).
* The password that you register here is NOT related to the 4-number password that is required in order to
access the Network screen in the scanner itself.
Type the same password as you did in the New Password field in here.
* This procedure is necessary in order to ensure that the password was entered correctly.
Page 2-25