Oce OP1030 Operation Manual page 75

2-6 System Setting
• Orig. Image Quarity (Only available in selecting monochrome)
• Resolution
• File Type
• JPEG Quality (Only available in Color Copiers)
• Output Color Type
• Multiple scanning
• File Name
You can select from among the following 4 original types in order to suit the originals that are actually
being scanned: Photo, Text, Text+Photo and OCR
You can select from among the following 4 scanning resolutions: 600 dpi, 400 dpi, 300 dpi and 200 dpi
Sets the file format in which scanned data will be saved: TIFF, PDF and JPEG (Only available in Color
Copiers)
Sets the JPEG Quality.
1 (Low) / 2 / 3 (Middle) / 4 / 5 (Hight)
Sets the output Color Type.
RGB / sRGB
You can select whether to perform continuous scanning or not.
Yes/No
Sets the file name (up to 16 single-byte characters) for saving scanned data.
Page 2-22