Table of Contents
Advertisement
Connecting to the Mains Supply
•
The Soundbar and sub-woofer are designed to operate with the supplied mains
adapter and mains cables.
•
Connecting the Soundbar to any other power source may damage the unit. Unwind the
mains adapter and mains cable to their full length. Connect the mains adapter to the
DC IN socket of the unit, then connect the mains cable to the mains adapter and into a
mains socket.
•
Connect the mains cable to the AC~ socket of the sub-woofer and then into a mains
socket.
•
Make sure the mains cables are firmly inserted into the mains sockets. The Soundbar
and the sub-woofer are now connected and ready to use.
•
To switch the Soundbar and the sub-woofer off completely, remove the mains plugs
from the mains sockets.
Ensure all audio connections of the Soundbar are connected before connecting to
the mains power socket.
To the mains socket
Wireless Pairing the Soundbar and the Sub-woofer
There is no cable needed to connect the Soundbar with the sub-woofer. When the
Soundbar is on, it will automatically pair with the sub-woofer. Place the soundbar and sub-
woofer close to each other.
• Never press the RESET Button at the back of the sub-woofer.
• If the RESET Button is pressed accidentally causing the soundbar and sub-woofer to unpair, follow the
steps below to re-pair.
1. Press
STANDBY to switch the soundbar to standby mode.
2. Press and hold MUTE on the remote control until the red LED indicator on the soundbar blinks.
3. Press and hold the RESET Button at the back of the sub-woofer until the LED indicator blinks on the
sub-woofer.
– The LED indicators will continue blinking while pairing and will become steady when pairing is
successful.
– If the pairing fails, the LED indicator on the sub-woofer will light up in yellow.
S42SWLH13_IB_RC_130531_Michelle.indd 17
MP3 LINK
L
AUX
R
OPTICAL
DC IN
COAXIAL
HDMI IN 1
HDMI IN 2
HDMI OUT
To the mains socket
AC ~
31/5/13 5:28 PM
17
Hide quick links:
Advertisement
Table of Contents
