Check Point Of Every 150 Hours; Check Points Of Every 200 Hours - Kubota SM-E3B Series Workshop Manual

SM-E3B SERIES WSM

[6] CHECK POINT OF EVERY 150 HOURS

[7] CHECK POINTS OF EVERY 200 HOURS

Replacing Oil Filter Cartridge (for Optional Depth Oil Pans)
CAUTION
• Be sure to stop the engine before changing filter cartridge.
1. Remove the oil filter cartridge (1) with the filter wrench.
2. Apply a slight coat of oil onto the new cartridge gasket.
3. To install the new cartridge, screw it in by hand. Over tightening
may cause deformation of rubber gasket.
4. After the new cartridge has been replaced, the engine oil
normally decrease a little. Thus see that the engine oil does not
leak through the seal and be sure to read the oil level on the
dipstick. Then, replenish the engine oil up to the specified level.
IMPORTANT
• To prevent serious damage to the engine, replacement
element must be highly efficient.
genuine filter or its equivalent.
(1) Engine Oil Filter Cartridge
Replacing Oil Filter Cartridge (for Standard Depth Oil Pans)
CAUTION
• Be sure to stop the engine before changing filter cartridge.
1. Remove the oil filter cartridge (1) with the filter wrench.
2. Apply a slight coat of oil onto the new cartridge gasket.
3. To install the new cartridge, screw it in by hand. Over tightening
may cause deformation of rubber gasket.
4. After the new cartridge has been replaced, the engine oil
normally decrease a little. Thus see that the engine oil does not
leak through the seal and be sure to read the oil level on the
dipstick. Then, replenish the engine oil up to the specified level.
IMPORTANT
• To prevent serious damage to the engine, replacement
element must be highly efficient.
genuine filter or its equivalent.
(1) Engine Oil Filter Cartridge
G-16
G GENERAL
Use only a KUBOTA
[a] Standard Type
[b] One-side Maintenance Type
W1018457
Use only a KUBOTA
[a] Standard Type
[b] One-side Maintenance Type
W1018643
KiSC issued 03, 2011 A