Kubota SM-E3B Series Workshop Manual page 99

SM-E3B SERIES WSM
Fan Drive Pulley
1. Secure the flywheel to keep it from turning.
2. Remove the fan drive pulley screw.
3. Draw out the fan drive pulley with a puller.
(When reassembling)
• Install the pulley to crankshaft, aligning the mark (1) on them.
• Apply engine oil to the fan drive pulley retaining screw. And
tighten it.
Tightening torque Fan drive pulley screw
(1) Alignment Mark
S-38
DIESEL ENGINE
118 to 127 N·m
12.0 to 13.0 kgf·m
86.8 to 94.0 lbf·ft
W10181950
KiSC issued 03, 2011 A