2. Gently lay the system on its right side on a stable, nonslip surface.
3. Remove any cables connected to the card.
4. Unscrew the PCI card retainer screw (see
5. Remove the PCI card.
Gently rock the PCI card forward, and then lift it straight out of the PCI card slot
and set it aside on an antistatic surface.
Removing a PCI Card
FIGURE 5-18
6. Choose your next step:
If you are not replacing the PCI card, replace the slot filler panel, and then
■
close the system by performing the steps in
Instructions" on page
If you are replacing the card, follow the instructions in
■
"Installing a PCI Card" on page
FIGURE 5-18
5-5.
5-31.
Chapter 5 Maintaining the Workstation
).
Section 5.3.1, "Postinstallation
Section 5.10.2,
5-31