Cleaning Blocked Steamer Accessories - Kogan KAMOP51STMA User Manual

DANGER OF SCALDING
● Cleaning blocked steamer accessories.
Due to the high mineral content of water in some areas, you may notice that less
steam comes out from the Hand-Held Steamer accessories. This may be caused by
calcium build-up inside the tip of the nozzle.
To clean calcium build-up, we recommend using a spray lubricant. Spray a small burst
or two of the lubricant inside the tip of the Jet Nozzle. After spraying lubricant inside
the component, fill the steamer with water according to the directions and run a
continuous jet of steam through the affected accessory to several minutes to remove
the deposit. Once the steam pathway is clean, aim the steamer at a neutral surface or
a cleaning cloth to make sure no debris is emitted.
WE RECOMMEND PREFORMING THIS PROCEDURE IN A PROTECTED AND
WELL-VENTILATED AREA.
Microfiber cloth care:
Machine wash at 60℃(140℉)
●
Do not bleach
●
Do not use fabric softener
●
30