Advertisement
Use as A Hand Steam Cleaner
Push the lock catch (5), take the main body (A) out of the holder (B) and take out
•
the power cord.
Install the accessory adaptor at the top of main body (A), until it fixes into place.
•
Press the lock button on the main body to remove the accessory adaptor from
•
main body (A)
Choose the appropriate accessories (check accessories list), to attach to the
•
accessory adaptor (F), then turn clockwise, until it fixes into the place.
Cleaning & Care
Be sure that the unit is disconnected from power when cleaning.
Drain the remaining water in the tank and clean the tank after every use.
Please use detergent to clean and then wash with clean water and air dry the accessories
when they are dirty.
How to Decalcify the Water Tank
To clean calcium deposits that builds up inside the water tank, add one or two tablespoons of
white vinegar and close the water tank with the cap and shake the contents. Do not turn the
steamer on.
Thoroughly rinse with clean water.
Removing Limescale
If your steam mop begins to produce steam more slowly than usual or stops producing
steam, you may need to remove limescale. Limescale can develop over time on the metal
parts and greatly affect mop performance.
It is necessary to remove limescale on a regular basis every 25-50 times you use a full tank of
water or at least once a month, especially in areas with hard water.
10
Advertisement
