Cleanining And Maintenance; How To Decalcify The Water Tank Interior; Cleaning Procedure To Remove Lime Scale - Kogan KAMOP51STMA User Manual

CLEANING AND MAINTENANCE
BE SURE THAT THE UNIT IS DISCONNECTED FROM THE POWER OUTLET
WHEN PERFORMING CLEANING
Drain the remaining water in the tank and clean the tank after every use. Please use
detergent to clean the accessories (Jet Nozzle and Rough Brush) when
they are dirty, then wash with clean water and air dry.

How to decalcify the Water Tank interior:

To clean calcium deposits that build up inside the Water Tank, add one or two
tablespoons of white vinegar to a full Water Tank, close the Water Tank cap and shake
the contents. DO NOT TURN THE STEAMER ON.
Let the unit sit for a few hours. Then, empty the Water Tank and refill with clean water
and empty until it rinses clear.
DO NOT IMMERSE THE STEAM MOP IN WATER.
● Cleaning procedure to remove lime scale
If your STEAM MOP begins to produce steam more slowly than usual or stops
producing steam, you may need to remove lime scale. Lime scale can develop over
time on the metal parts and greatly affect mop performance. It is necessary to remove
the scale on a regular basis every 25-50 times you use a full tank of water or at least
once a month, especially in areas with hard water. The frequency of lime scale
removal depends upon the hardness of your tap water and how often you use the
steam mop.
The STEAM MOP uses tap water. However, in areas with hard water,
Distilled water should be used for better performance.
To remove lime scale from the STEAM MOP, please follow these procedures:
28