By Using Scraper; By Using Cleaning Solution - Kogan KAMOP51STMA User Manual

By using Scraper

Make sure that the STEAM MOP is disconnected from the power supply before
1)
maintenance.
Use the cleaning pin to remove scale deposits from the small hole of the stream
2)
outlet in the Main Body by swirling and pushing
the pin up and down you will clean the steam
outlet. Always ensure that all scale debris has
been removed from the steam outlet before
reassembling. Continue swirling Cleaning Pin
until no further debris is evident.

By using cleaning solution

Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water
1)
tank.
Secure and position the unit to ensure steam released is slimed away from the
2)
floor or surrounding objects and surfaces. Plug the unit in, turn the unit ON by
pressing the Power Switch (O/I) and allow the unit to produce steam until the
vinegar/water solution is used up.
Repeat the above procedures as many times as necessary until a normal steam
3)
flow rate is achieved.
Fill the Water Tank with fresh water and rinse out.
4)
5) Fill the Water Tank with fresh water, attach to the unit and release steam through
the system until the Water Tank is empty.
Do not leave the steamer unattended during the lime scale removal process
and /or while in use.
Perform a test cleaning on a suitable isolated area after each lime scale removal to
ensure that there is no debris in the system.
29