Kogan KAMOP51STMA User Manual page 13

Replace the Water Tank cap and
turn clockwise approximately
90° to the "CLOSE" position
until the cap is tightened
securely.
The STEAM MOP uses tap
water. However, in areas
with hard water, distilled
water should be used for better performance.
Make sure the Copper Cone inside the Water Tank is always
submerged in water (As illustrated in Fig.1i) while operating
The STEAM MOP.
Never put cleaning detergents or scented products in to the STEAM MOP.
This will make operation unsafe and damage the unit.
Select one of the following Steam Regulator position s :
2)
Low, 2-Medium, 3-High and 4-Hot Spray
1-
1 - Low and 2-Medium Setting: Ideal for clearing
●
All hard floors, such as linoleum, ceramic,
marble, wood, etc.
3 - High Setting: ideally for cleaning carpets and rugs.
●
● 4 - High Spray Setting: Ideal for cleaning bathroom,
kitchens, window sills, etc.
You can change the Steam Regulator position and change the steam output while
operating the STEAM MOP.
13