Kogan KAMOP51STMA User Manual page 25

5) Hold the Hand-Held Steamer in one hand and grasp the handle grip on the
Telescopic Hose with the other hand as illustrated above.
6) Slowly pass over surface to be cleaned. The absorbent Coral Cloth picks up the dirt
loosened by the steam. Keep a towel handy and wipe away any excess water that
may accumulate.
Pulling on the Telescopic Hose with excessive force will damage it, possibly resulting in a
steam leak.
DANGER OF SCALDING
Do not touch the Duster/Coral Cloth during usage, as these components can get
extremely hot. Keep the telescopic hose away from your body and avoid touching
the hose, as it can get hot.
When the Hand-Held Steamer stops emitting steam, simply turn off and unplug the
7）
unit, refill the Water Tank and continue cleaning.
8) Once you finish cleaning allow the Duster Coral Cloth to cool down and carefully
remove it from the Duster frame, as the Coral Cloth could still be hot.
GARMENT STEAMING CLOTH
Make sure that the STEAM MOP is unplugged.
Fill the Water Tank with water. Please refer to
1)
the "HOW TO USE THE STEAM Mop" section
in the manual.
Install the Garment Steaming Cloth onto the Window
2)
Clearing/Garment Steaming Tool and attach the
Window Clearing/Garment Steaming Tool to
the Telescopic Hose as described in the "How To
Assemble the optional Accessories" section in
this manual.
3) Select one of the following Steam Regulator position: 1-Low or 2- Medium. Do not
use 3-High and 4 –Hot Spray steam settings when using the Garment Steamer. You
can change the Steam Regulator position and the steam out put while operating the
STEAM MOP.
25